二十一、键槽配合模块零件

主程序：只负责调用子程序1

子程序1：只负责z向下刀和调用子程序2

子程序2：负责xy评价的层走刀路线

| 主程序 | 子程序1 | 子程序2 |
| ------------------------------------------------------------ | ------------------------------------------------------------ | ------------------------------------------------------------ |
| 主程序 O0001 G17 G54 G21 G90 G94 G40 G49 G80 M06 T01 G0 X80 Y42.5 M03 S2000 Z50 G68 X60 Y40 R33.59 M98 P0051 G69 G68 X60 Y40 R[90+56.31] M98 P0051 G69 G68 X60 Y40 R[180+33.59] M98 P0051 G69 G68 X60 Y40 R[270+56.31] M98 P0051 G69 G91 G28 Z0 G90 G28 X0 Y0 M05 M30 | #子程序1 O0051 G0 Z5 G01 Z-3 F80 M98 P0052 G0 Z5 G01 Z-6 F80 M98 P0052 G0 Z5 G01 Z-9 F80 M98 P0052 G0 Z5 G01 Z-12 F80 M98 P0052 G0 Z5 G01 Z-15 F80 M98 P0052 G0 Z5 G01 Z-18 F80 M98 P0052 G0 Z5 G01 Z-20 F80 M98 P0052 G0 Z50 M99 | #子程序2 O0052 G01 X104.79 Y42.5 F300 G02 Y37.5 R2.5 G01 X80 G02 Y42.5 R2.5 M99 ![](http://img.tangyingjie.com/20251028093442149.jpg) |